RV Pad Paving in Rio Rancho, NM

The most-requested project in Rio Rancho subdivisions

Across Rio Rancho — from established neighborhoods off Southern and Northern Boulevard to the newer areas in 87144 — the story is the same: concrete driveway out front, and a gravel or dirt strip along the side of the house where the RV lives. On mesa sand, that strip ruts under the tires, the jacks sink, and every windy day blows it around.

How we build an RV pad

1. Measure the RV and the route. Length, width, axle positions, gate width, and the turn from the street.
2. Dig out backfill. The ground beside newer houses is often loose construction fill. It comes out and is replaced with compacted base.
3. Heavier base. More compacted aggregate than a car driveway, especially under the wheels.
4. Thicker asphalt. A heavier section to carry the weight without rutting.
5. Grade away from the house. Water goes to the street or a safe outlet — never toward the foundation.
6. Smooth tie-in. A flush joint at your concrete driveway or curb.

Tips for living with it

• Use jack pads or boards under stabilizers, especially in summer.
• Avoid turning the wheels while parked during the first hot weeks.
• Sealcoat the pad along with the driveway every few years.

In an HOA? We'll give you a written scope and sketch for your architectural submission. More on RV pads and side-yard parking.

Common questions

Related pages